left

电子产品制造设备2020年02月06日
Professor Harry Tuller, left, leads a team that has found a way to print useful devices, like gas sensors, from inkjet printers. At far right is Woochul Jung, graduate student in material sciences and engineering, and at center is Amy Leung, a sophomore in chemical engineering; between them is the printing device. Photo / Donna Coveney

Anne Trafton, News Office
October 0, 2007


A tiny "electronic nose" that MIT researchers have engineered with a novel inkjet printing method could be used to detect hazards including carbon monoxide, harmful industrial solvents and explosives.

Led by MIT professor Harry Tuller, the researchers have devised a way to print thin sensor films onto a microchip, a process that could eventually allow for mass production of highly sensitive gas detectors.

"Mass production would be an enormous breakthrough for this kind of gas sensing technology," said Tuller, a professor in the Department of Materials Science and Engineering (MSE), who is presenting the research Oct. 0 at the Composites at Lake Louise Conference in Alberta, Canada.

The prototype sensor, created by Tuller, postdoctoral fellow Kathy Sahner and graduate student Woo Chul Jung, members of MIT's Electroceramics Group in MSE, consists of thin layers of hollow spheres made of the ceramic material barium carbonate, which can detect a range of gases. Using a specialized inkjet print head, tiny droplets of barium carbonate or other gas-sensitive materials can be rapidly deposited onto a surface, in any pattern the researchers design.

The miniature, low-cost detector could be used in a variety of settings, from an industrial workplace to an air-conditioning system to a car's exhaust system, according to Tuller. "There are many reasons why it's important to monitor our chemical environment," he said.

For a sensor to be useful, it must be able to distinguish between gases. For example, a sensor at an airport would need to know the difference between a toxic chemical and perfume, Tuller said. To achieve this, sensors should have an array of films that each respond differently to different gases. This is similar to the way the human sense of smell works, Tuller explained.

"The way we distinguish between coffee's and fish's odor is not that we have one sensor designed to detect coffee and one designed to detect fish, but our nose contains arrays of sensors sensitive to various chemicals. Over time, we train ourselves to know that a certain distribution of vapors corresponds to coffee," he said.

In previous work designed to detect nitrogen oxide (NOx) emissions from diesel exhaust, the researchers created sensors consisting of flat, thin layers of barium carbonate deposited on quartz chips. However, the films were not sensitive enough, and the team decided they needed more porous films with a larger surface area.

To create more texture, they applied the barium carbonate to a layer of microspheres, hollow balls less than a micrometer in diameter made of a plastic polymer. When the microspheres are burned away, a textured, highly porous layer of gas-sensitive film is left behind.

The resulting film, tens of nanometers (billionths of a meter) thick, is much more sensitive than flat films because it allows the gas to readily permeate through the film and interact with a much larger active surface area.

At first, the researchers used a pipette to deposit the barium carbonate and microspheres. However, this process proved time-consuming and difficult to control.

To improve production efficiency, the researchers took advantage of a programmable Hewlett-Packard inkjet print head located in the MIT Laboratory of Organic Optics and Electronics. The inkjet print head, like that in a regular inkjet printer, can deposit materials very quickly and controllably. The special gas-sensitive "inks" used in this work were optimized for printing by Amy Leung, an MIT sophomore in chemical engineering.

This allows the researchers to rapidly produce many small, identical chips containing geometrically well-defined gas-sensing films with micrometer dimensions. Patterns of different gas-sensitive inks, just as in a color printer, can be easily generated to form arrays with very little ink required per sensor.

In future studies, the team hopes to create large arrays of gas-sensitive films with controlled three-dimensional shapes and morphologies.

The research is funded by the National Science Foundation.杭州白癜风医院地址
小孩咳嗽感觉有痰咳不出怎么办,用什么药好?
汕头牛皮癣医院哪家好
相关阅读
西南政大某男孩子,对“唐山打人事件”发表不当言论,被学校处分

当代青年人肩负关键性盼望和担当,作为里华儿女要继承丰富的文化,接所受...

2024-01-08
大学继续教育的运营和民俗建设

为何在此期间高等教育高等学府在其发展处理过程里面,要有一定的危机自我...

2023-11-05
关乎大资金动向!科创板“芯片”指数来了,42只样本股名单公布;上交所几大指数也调整,腾讯、美团等权重

A股、公司股票多个极其重要指标公布或修正,这意味着之外的大资金样式也...

2023-10-17
5年短时间、474亿投入,恒大恒驰5今晚要预售了!

5年了,中超三阳方才有了实质性成效?7月底6日晚,首款掀背车恒驰5方才要...

2023-10-14
德国4月初PPI同比上涨33.5% 因能源价格飙升

比利时统计局(Destatis)周五表示,均受能源量减少推动,比利时4月末的产品...

2023-10-13
我,日本女孩,26岁嫁到河南农村,和婆婆周旋,送我读大学

我,韩国女孩,26岁娶妻到河南小村,和媳妇斗智斗勇,送我读过所该学校 讲...

2023-10-10
友情链接